Year 2009,
Volume: 9 Issue: 1, 929 - 934, 14.02.2012
Abstract
STATOR AND ROTOR CURRENTS ANALYSIS OF THE INVERTED ROTOR INDUCTION MOTOR
References
- Toliyat H. A., Lipo T. A., “Transient analysis of cage induction machines under stator, rotor bar and end ring faults,” IEEE Trans. Energy Conversion, Vol: 10, pp. 241–247, June 1995.
- Joksimovic M. G. J., Penman, “The detection of inter-turn short circuits in the stator windings of operating motors,” IEEE Trans. Ind. Electron., Vol: 47, pp. 1078–1084, Oct. 2000.
- Fitzgerald A.E, Kingsley Jr. C., Umans SD. Electric machinery. UK: McGraw Hill;1992.
- Al-Jufout S., “Modeling of transients and steady-state operation of the induction motor”, In: Proceedings of the 11th European Simulation Symposium, SCS;1999. pp. 670–4.
- Al-Jufout S., “Analysis of the induction motor reclosing process”, In: Proceedings of the 2nd Middle East Symposium on Simulation and Modeling, SCS;2000. pp. 115–9.
- Nasar SA., Handbook of electric machines. New York, USA: McGraw-Hill, 1987.
- Andreas J.C., “Energy efficient electric motors”, NewYork and Basel: Marcel Dekker, 1988.
- Jianyi C., Smith R.H., “High effciency induction motors design”, In: 29th Universities Power Engineering Conference (UPEC'94), Ireland, 14-16, Sept., Vol: 1, 1994. pp. 13-16.
- Akuner C., Temiz I., “Expression of the magnetic flux distribution in squirrel caged induction motors by means of simulation program”, Wseas Transactions On Power Systems, ISSN 1790, 5060- Issue 11, Vol: 1, pp. 1959-1961, Nov. 2006.
- Temiz I., Akuner C., “A Study of different air gaps on the effect of torque and efficiency in induction machines”, Wseas Transactions On Power Systems, ISSN 1790,5060- Issue 11, Vol: 1, pp. 1955-1958, Nov. 2006.
Year 2009,
Volume: 9 Issue: 1, 929 - 934, 14.02.2012
Abstract
References
- Toliyat H. A., Lipo T. A., “Transient analysis of cage induction machines under stator, rotor bar and end ring faults,” IEEE Trans. Energy Conversion, Vol: 10, pp. 241–247, June 1995.
- Joksimovic M. G. J., Penman, “The detection of inter-turn short circuits in the stator windings of operating motors,” IEEE Trans. Ind. Electron., Vol: 47, pp. 1078–1084, Oct. 2000.
- Fitzgerald A.E, Kingsley Jr. C., Umans SD. Electric machinery. UK: McGraw Hill;1992.
- Al-Jufout S., “Modeling of transients and steady-state operation of the induction motor”, In: Proceedings of the 11th European Simulation Symposium, SCS;1999. pp. 670–4.
- Al-Jufout S., “Analysis of the induction motor reclosing process”, In: Proceedings of the 2nd Middle East Symposium on Simulation and Modeling, SCS;2000. pp. 115–9.
- Nasar SA., Handbook of electric machines. New York, USA: McGraw-Hill, 1987.
- Andreas J.C., “Energy efficient electric motors”, NewYork and Basel: Marcel Dekker, 1988.
- Jianyi C., Smith R.H., “High effciency induction motors design”, In: 29th Universities Power Engineering Conference (UPEC'94), Ireland, 14-16, Sept., Vol: 1, 1994. pp. 13-16.
- Akuner C., Temiz I., “Expression of the magnetic flux distribution in squirrel caged induction motors by means of simulation program”, Wseas Transactions On Power Systems, ISSN 1790, 5060- Issue 11, Vol: 1, pp. 1959-1961, Nov. 2006.
- Temiz I., Akuner C., “A Study of different air gaps on the effect of torque and efficiency in induction machines”, Wseas Transactions On Power Systems, ISSN 1790,5060- Issue 11, Vol: 1, pp. 1955-1958, Nov. 2006.
There are 10 citations in total.
Details
| Primary Language | English |
|---|---|
| Journal Section | Articles |
| Authors | |
| Publication Date | February 14, 2012 |
| Published in Issue | Year 2009 Volume: 9 Issue: 1 |
