Yıl 2018, Cilt 4, Sayı 11, Sayfalar 209 - 215 2018-08-27

THE REAL CAPABILITIES OF THE PHOTOGRAMMETRIC AND THE STEREOPHOTOGRAMMETRIC METHODS FOR MEASUREMENT IN MECHANICAL AND MANUFACTURING ENGINEERING

Boris Sakakushev [1] , Svetlin Parvanov [2] , Tzvetelin Gueorguiev [3]

4 12

The paper presents the research results of the team of authors in the application of the photogrammetric method from its initial phase to its present condition for measuring small and large dimensions in fine mechanics and technics, as well as the established theoretical bases for the application of this method for measurement of deformations in mechanical constructions and parts. Presented are the main influencing factors that have critical influence on the measurement accuracy characteristics, and determine the uncertainty budget. The typical errors of the method are outlined for certain conditions of its application and when using specific equipment. Recommendations how to decrease these errors are made. The paper devotes special attention to the initial phase of applying the stereo photogrammetric method for measurement of large dimensions and deformations in mechanical and manufacturing engineering. Presented are the main dependencies of the method by analyzing the constituent components. According to the authors, this method has a bright future for application in manufacturing and construction engineering. The goals for continual research are set out for determining the accuracy characteristics of the methods and for widening the range of their application. Recommendations are made in relation to the main characteristics, the equipment requirements and the application of these methods in real conditions.

photogrammetric method, stereo photogrammetric method, small dimensions, large dimensions, measurement, error, uncertainty budget
  • 1. Atanasov A., Sakakushev B.. (2012) Applications of the Photogrammetric Method of Measuring Macro and Microgeometry in Mechanical Engineering. Journal of the Union of Scientists Ruse, 1/2012. Series “Technical Sciences” № 5. ISSN 1311-106X. pp. 21 – 24. 2. Georgiev G. Georgieva N. (2014) Investigation of the Possibilities for the Use of Free Software for Data Processing Used for Accurate Measurement Details Through Photogrammetry, ARTTE Vol. 2, No. 3, 2014 ISSN 1314-8788 (print), ISSN 1314-8796 (online), pp. 202-210. 3. Georgiev G. (2016) Analysis of the Impact of Distance Between the Object and the Matrix of the Shooting Techniques on the Coefficient of the Transformation for Obtaining Dimensions Features by Photogrammetric Method, ARTTE Vol. 4, No. 4, 2016 ISSN 1314-8788 (print), ISSN 1314-8796 (online), DOI: 10.15547/artte.2016.02.08, pp. 285-290. 4. Georgiev G., Sakakushev B., Georgieva K.. (2015) Examination of the Applicability of the Photogrammetric Method for Measuring Very Small Dimensions, Proceedings of the University of Ruse, 2015, Vol. 54, Series 2, ISSN 1311-3321, pp. 15-19. 5. Georgiev G., Sakakushev B.. (2013) Examining the Possibilities of Application of Photogrammetry for Measurements in the Field of Machine Building. International Scientific Conference "Engineering, Technology, Education" ICTTE 2013, 30-31.10.2013, Proceedings ISSN 1314-9474, pp. 43-49. 6. Sakakushev B. Georgiev G., Zhelezarov I.. (2015) The First Steps for Building an Uncertainty Budget for Photogrammetric Measurements in Engineering Information Processing Systems, Kharkivskiy Universitet Povitryanih Sil, 2015, Vol. 2, ISSN 1681-7710, pp. 54-57. 7. Sakakushev B., Grigorov V., Georgiev G.. (2013) Method to Determine the Distance to the Site Using Stereophotometry. Theoretical and Practical Aspects of the Development of Modern Science. Materials from the VIII International Scientific and Practical Conference, Moscow, 29.06.2013/ Scientific and Informational Publishing Centre «Institute for Strategic Research». – Moscow: Izdatelstvo «Spetskniga», 2013. – 252 p. ISBN 978-5-91891-297-3, pp.77-80. 8. Sakakushev B, Georgiev G.. (2016) Examination of the Applicability of the Photogrammetric Method to Measure Dimensions Smaller Than 2 mm. International Conference, Durres, Albania, 2016. Knowledge International Journal Scientific Papers, 2016. Vol.13.3, ISSN 1857-92, pp. 515-522. 9. Sakakushev B., Todorov T., Stefanov G.. (2009) A Stereo Photogrammetric Method for Measuring the Deformations of Mechanical Structures. Journal of the Union of Scientists Ruse, 1/2009. Series “Technical Sciences” №5. ISSN 1311-106X, pp. 17-20. 10. Sakakushev B., Stoev S., Parvanov S.. (2007) Analysis of the Method of 3D Reconstruction in Calibrated Stereovision. Journal of the Technical University at Plovdiv “Fundamental Sciences and Applications”, Vol. 14, 2007. 11. Sotirov, B., Tonev D.. (2013). Measurement Uncertainty of Simple Effective Diameter Using Measuring Wires. In “Materials Science, Hydro- and Aerodynamics and National Security”: Third National Conference with International Participation, 24-25.10.2013. Sofia, Bulgaria: Bulgarian Academy of Sciences, pp. 74-80. 12. Zhelezarov, I. (2005) Methods for Data Processing from Measurement and Testing with Small Sample Sizes. Radmi 2005. Vrnjacka banja, Serbia and Montenegro. 2005. ISBN 86-83803-20-1. pp. 562 – 565.
Birincil Dil en
Konular Sosyal ve Beşeri Bilimler
Dergi Bölümü Makaleler
Yazarlar

Yazar: Boris Sakakushev
Ülke: Bulgaria


Yazar: Svetlin Parvanov
Ülke: Bulgaria


Yazar: Tzvetelin Gueorguiev
Ülke: Bulgaria


Bibtex @araştırma makalesi { ijaedu460811, journal = {International E-Journal of Advances in Education}, issn = {}, eissn = {2411-1821}, address = {OCERINT International Organization Center of Academic Research}, year = {2018}, volume = {4}, pages = {209 - 215}, doi = {}, title = {THE REAL CAPABILITIES OF THE PHOTOGRAMMETRIC AND THE STEREOPHOTOGRAMMETRIC METHODS FOR MEASUREMENT IN MECHANICAL AND MANUFACTURING ENGINEERING}, key = {cite}, author = {Gueorguiev, Tzvetelin and Parvanov, Svetlin and Sakakushev, Boris} }
APA Sakakushev, B , Parvanov, S , Gueorguiev, T . (2018). THE REAL CAPABILITIES OF THE PHOTOGRAMMETRIC AND THE STEREOPHOTOGRAMMETRIC METHODS FOR MEASUREMENT IN MECHANICAL AND MANUFACTURING ENGINEERING. International E-Journal of Advances in Education, 4 (11), 209-215. Retrieved from http://ijaedu.ocerintjournals.org/issue/38944/460811
MLA Sakakushev, B , Parvanov, S , Gueorguiev, T . "THE REAL CAPABILITIES OF THE PHOTOGRAMMETRIC AND THE STEREOPHOTOGRAMMETRIC METHODS FOR MEASUREMENT IN MECHANICAL AND MANUFACTURING ENGINEERING". International E-Journal of Advances in Education 4 (2018): 209-215 <http://ijaedu.ocerintjournals.org/issue/38944/460811>
Chicago Sakakushev, B , Parvanov, S , Gueorguiev, T . "THE REAL CAPABILITIES OF THE PHOTOGRAMMETRIC AND THE STEREOPHOTOGRAMMETRIC METHODS FOR MEASUREMENT IN MECHANICAL AND MANUFACTURING ENGINEERING". International E-Journal of Advances in Education 4 (2018): 209-215
RIS TY - JOUR T1 - THE REAL CAPABILITIES OF THE PHOTOGRAMMETRIC AND THE STEREOPHOTOGRAMMETRIC METHODS FOR MEASUREMENT IN MECHANICAL AND MANUFACTURING ENGINEERING AU - Boris Sakakushev , Svetlin Parvanov , Tzvetelin Gueorguiev Y1 - 2018 PY - 2018 N1 - DO - T2 - International E-Journal of Advances in Education JF - Journal JO - JOR SP - 209 EP - 215 VL - 4 IS - 11 SN - -2411-1821 M3 - UR - Y2 - 2018 ER -
EndNote %0 International E-Journal of Advances in Education THE REAL CAPABILITIES OF THE PHOTOGRAMMETRIC AND THE STEREOPHOTOGRAMMETRIC METHODS FOR MEASUREMENT IN MECHANICAL AND MANUFACTURING ENGINEERING %A Boris Sakakushev , Svetlin Parvanov , Tzvetelin Gueorguiev %T THE REAL CAPABILITIES OF THE PHOTOGRAMMETRIC AND THE STEREOPHOTOGRAMMETRIC METHODS FOR MEASUREMENT IN MECHANICAL AND MANUFACTURING ENGINEERING %D 2018 %J International E-Journal of Advances in Education %P -2411-1821 %V 4 %N 11 %R %U
ISNAD Sakakushev, Boris , Parvanov, Svetlin , Gueorguiev, Tzvetelin . "THE REAL CAPABILITIES OF THE PHOTOGRAMMETRIC AND THE STEREOPHOTOGRAMMETRIC METHODS FOR MEASUREMENT IN MECHANICAL AND MANUFACTURING ENGINEERING". International E-Journal of Advances in Education 4 / 11 (Ağustos 2018): 209-215.